6.3 Removable Panels Compliance Standards AWI PremiumPending review AWI CustomPending review AWI EconomyPending review ADA StandardsN/A Specification+ add spec reference Notes / Requirements Removable panels on diewalls are screwed into place. Leave a 1/16″ gap around all sides of the panel. Screws sit 1″ from the top and side. Maximum screw spacing is 30″. Beyond that, add an extra screw at the center of the run. Open item Finger pull detail still to be added. Drawings: REMOVABLE PANEL 1″ EQ (30″ MAX) EQ (30″ MAX) 1″ 1″ 28″ 1″ SCREW LAYOUT (ELEVATION) DIEWALL REMOVABLE PANEL 1/16″ 1/16″ GAP TYP. ALL SIDES PANEL EDGE (DETAIL)