6.1 Finished End Panels / Appliance Panels

Compliance Standards

AWI Premium	Pending review
AWI Custom	Pending review
AWI Economy	Pending review
ADA Standards	N/A

Specification

+ add spec reference

Notes / Requirements

• Finished end panels are ¾″ standard.
• Undercounter panels ship 1″ taller than the countertop mounting height. The extra 1″ is scribe allowance and is trimmed in the field.
• Undercounter panel depth is 1″ less than the countertop depth, so the countertop runs past the panel.
• Full-height panels (refrigerator and appliance style) run ⅛″ minimum to ¼″ maximum past the countertop depth. The panel caps the countertop end.
• The two conditions run opposite directions at the front edge. Undercounter panels sit back from the countertop; full-height panels project past it. Confirm which condition applies before cutting.

Conditions:

Condition	Height	Depth
Undercounter finished end	Countertop mounting ht. + 1″ (field trim)	Countertop depth − 1″
Full-height / appliance panel	Per elevation	Countertop depth + ⅛″ min. to ¼″ max.

Drawings: