2.4.4 Handle Positions Compliance Standards AWI PremiumPending review AWI CustomPending review AWI EconomyPending review ADA StandardsPending review Specification+ add spec reference Notes / Requirements Tab pulls are routed into the side of the door at the bench. Routing keeps pulls from rubbing where doors are hung as a pair. Surface mounting on the back side of the door is acceptable. Standard handle location is 2″ in from the top and 2″ in from the side, measured to the start of the first hole. Drawings: DOOR - BACK FACE TOP OF DOOR HANDLE EDGE 2″ 2″ PER PULL TAB PULL LOCATION (ELEVATION) PULLS CLEAR EACH OTHER AT PAIR TAB PULL ROUTED INTO DOOR EDGE FRONT BACK PAIR DOORS AT MEETING STILES (PLAN)