Skip to content

2.5.1 Drawer Boxes

Compliance Standards
AWI PremiumPending review
AWI CustomPending review
AWI EconomyPending review
ADA StandardsN/A
Specification
+ add spec reference
Notes / Requirements
  • Standard construction is CCF ordered drawer boxes.
  • Corners are dovetailed.
  • Sides are ½″ maple plywood.
  • Bottoms are ¼″.
  • Heights are variable. Hold standard heights to whole or half inches, 3″ minimum.
  • Depths vary by drawer slide type. Use whole inches.

Sizing rules:

DimensionIncrementLimit
HeightWhole or half inches3″ minimum
DepthWhole inchesPer drawer slide type

Drawings:

½″ MAPLE PLY FRONT DRAWER BACK ¼″ BOTTOM HEIGHT DEPTH - WHOLE INCHES DRAWER BOX (SECTION)
DRAWER SIDE DRAWER BOX FRONT THROUGH DOVETAIL ½″ DOVETAIL CORNER (ELEVATION)